Mô tả sản phẩm
Gen 4 Brushless DC Motor Controller, Dual Channel, 2 x 180A, 60V, Hall sensors input, Encoder input, USB, CAN, no Ethernet, STO PLe, Cat3, SIL3 (Pending)
Mã hàng hóa: GBLG2660T
Nsx: Roboteq/ Nidec
Thông số kỹ thuật
• USB, Serial, 0-5V Analog, or Pulse (RC radio) command
modes
• RS232 and RS485 serial ports
• Optional 10/100 Ethernet
• MODBUS ASCII and RTU Support over RS232 or
RS485. MODBUS TCP Support over Ethernet
• CAN bus up to 1 Mbit/s. Multi-Protocol support
– CANOpen DS402
– RoboCAN Meshed Network
– RawCAN Customizable to Any Protocol
• Auto switch between Serial, USB, CAN, Ethernet,
Analog, or Pulse based on user-defined priority
• Built-in dual 3-phase high-power drivers for two
brushless DC motors
• 2x180A Max, 2x120A continuous Current with I2T
protection algorithm
• Programmable current limit up to 180A (360A on single
channel version) per motor for protecting controller,
motor, wiring and battery.
• Output channels can be paralleled in order to drive a
single motor at up to 360A
• 97% or better typical Efficiency
• Supports Surface Permanent Magnet (SPM) motors or
Internal Permanent Magnet (IPM) motors
• Multiple Motor Operating mode
– Trapezoidal with Hall Sensors
– Sinusoidal with Hall+Encoder
– Sinusoidal with Encoders
– Sinusoidal with Hall Sensors
– Sinusoidal with Absolute Encoder
